Recovery in manufacturing growth slow but steady: Survey
Updated: Dec 09, 2014 02:55:19pm
The CII ASCON Survey for the July-September 2014 quarter was released at the CII Associations Council Meeting here on December-5.
The survey, which tracks the growth of industrial sector on a quarterly basis, based on feedback received from sectoral industry associations, shows that out of 59 sectors surveyed, the number of sectors reporting ‘excellent’ and high growth (>10 per cent) has shown an increase from 26.08 per cent in 2013 to 30.4 per cent in July-September 2014. At the same time, number of sectors registering ‘low’ and ‘negative’ growth for July- September 2014 quarter has marginally gone down from 73.90 per cent in 2013 to 69.48 per cent in July-September 2014.
The Survey categorises the growth range in four broad categories, namely excellent (>20 per cent), good (10-20 per cent), low (0-10 per cent), and negative (less than 0 per cent).
The disaggregated analysis of the Survey reveals that most of the high and excellent growth has been registered by segments of white goods, synthetic fibre, consumer non-durables such as imported oils, groundnut oil, rape seeds, along with machine tools and rubber machinery, etc.
The Vehicle industry has witnessed a low to negative growth in most of the segments such as passenger cars, commercial vehicles, utility vehicle, tyres, etc. However, two wheelers and three wheelers have registered excellent growth.
Segments of White Goods industry such as refrigerators, air conditioners, small appliances have registered about 12 per cent-15 per cent high growth rate. The LCD/LED segment has been witnessing a boost and growth has been exceptional pegging above 20 per cent mark. The rural purchase trends and sales in tier 4 and 5 cities have contributed significantly to this growth.
The Basic goods sector, this time again, has registered low growth with major segments like steel, fertilizer, paints, pig iron, and cement registering growth between 0-6 per cent on an average.
The intermediate goods sector after a prolonged period has shown positive growth trends. Segments such as power cables, circuit breakers, have grown between 10-20 per cent. Other segments such as motors, ball and roller bearings, capacitors continue to record a low growth.
Commenting on the survey report, Secretary, Department of Industrial Policy and Promotion, Amitabh Kant stated that for economy to grow at 9-10 per cent, manufacturing has to grow at 14-15 per cent every year. Countries such as Japan, Korea, and China have emerged as leading global economies only by building a strong manufacturing base. India too has to create a strong manufacturing environment to come out of the present economic shackle.
On the issue of inverted duty structure raised by many industry associations, while assuring DIPP support, he appealed to industry associations to come out with a detailed analysis with strong facts and figures.
Earlier, Secretary, Ministry of Heavy Industries, Rajan Katoch stated that the Department of Heavy Industries has formulated a scheme for enhancement of competitiveness of the capital goods sector. Under the scheme an outlay of Rs. 930 crore has been sanctioned. The scheme, on its implementation, would attempt to make the Indian capital goods sector globally competitive. The sub sectors of Capital Goods covered under the scheme are mainly for machine tools, textile machinery, construction and mining machinery, and process plant machinery. The proposed scheme addresses the issue of technological depth creation in the capital goods sector, besides creating common industrial facility centres.
Offering his comments, Director General, CII, Chandrajit Banerjee said, “There is an optimistic sentiment within the industry, with a strong confidence in new initiatives. The results of the ASCON Survey for this quarter are encouraging. 30.4 per cent sectors have grown in the range of 10 per cent and above mark. Though the industry still feels that the complete rebound of manufacturing will take time, the government’s focus on Ease of Doing Business, good governance, investments specifically inbound new investments will be the key areas eventually leading India towards becoming a strong manufacturing base.” (KNN/ES)





Loading...
